DIN rail style industrial use PLC Ethernet adapter
Brief introduction
DIN rail style PLC Ethernet adapter uses the existing power lines to transfer the network signals stably and it’s simple installation style make it can be applied in many industrial environments just as parking hall, harbor, railway, airport, metro, train, industrial automation production line etc.. Really a great weapon for industry 4.0!
Topology
| Specification |
| Model | WD-1000M-GT | WD-1000M-GS | WD-1000M-GD |
| | 1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface | 1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface |
| LED display lights | power |
| Link |
| Ethernet |
| Transfer band | 25,50 and 100MHz and MIMO (based on G.9963) |
| Protocol | IEEE802.3,IEEE802.3x, IEEE802.3u ITU-T G.9960/ITU-T G.9961 |
| Security | 128-DES |
| Transfer rate(PHY) | 800Mbps |
| TCP/IP | 400Mbps |
| Modulation | OFDM |
| Management | Remote Firmware update,support TR-069(optional) |
| 802.1D Ethernet Bridge |
| 802.1Q VLAN |
| Quality of Service(QoS) |
| IGMP(IPv4)Snooping&MLD(IPv6)Snooping |
| Working voltage | AC 90V-600V 60/50Hz | DC12V-300V |
| Operating environment | Working temperature:-20℃-50℃ |
| Working humidity:0-90% |
| Storage temperature:-40℃-70℃ |
| Size | 67*160*123 (mm) |
| Level of protection | IP40 |
| Weight | 0.35kg |
| Operating life | 40,000 hours |
| Transmission distance | 500 meters |
| Group(Max) | 1Master 7Slaves |
| Certification | FCC,CE class B,RoHS |
Feature
Plug and play, no setting.
Wide working voltage range, can transfer the network data in single phase, three phases and DC model with high rate.
DIN rail installation design, it’s easy to install and maintain.
Industrial design, vibration proof& damp proof& dust proof.
|
|
DIN rail style industrial use PLC Ethernet adapter Images
|
